mgs
[Top] [All Lists]

Midget Hood (Bonnet) Repair

To: mgs@autox.team.net
Subject: Midget Hood (Bonnet) Repair
From: Gonaj@aol.com
Date: Mon, 14 Feb 2000 10:06:09 EST
I had no idea when this theme started that a hood was such a big deal.
Try this.  Clean everything back to good solid metal.  Spot weld some new 
metal sheet to the underside of the hood.  The proper material is available 
from auto body supply shops.  Sand the entire hood, both sides and spray with 
a good 2 part, self etching primer, when fully cured finish with a good 
quality body filler.  NAPPA's extra light is excellent in spite of it's low 
cost.  refinish with proper primer and paint.
With proper application you will be amazed how well this will hold up.  Even 
on a hood.

George

<Prev in Thread] Current Thread [Next in Thread>