You'll need a 1-5/16" socket. If you buy one that fits the
rear axle too (needs to be a very thin wall) you'll save
yourself some grief and money. A 1-5/16" socket is a "must"
for an MGB, it fits several nuts/bolts on the car. The SK
1/2" square drive, stock #40142 will work on the rear axle
and also fit all the other locations.
http://pages.prodigy.net/larryhoy/MGTechSocket.htm .
Larry Hoy
http://pages.prodigy.net/larryhoy/
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net]On
> Behalf Of Andrew B. Lundgren
> Sent: Friday, January 14, 2000 3:54 PM
> To: mgs@autox.team.net
> Subject: Size of the bolt on the front lower
> pully that mounts to crank?
>
>
> Anyone know the size of the bolt on the front
> lower pully that bolts to the crank? I need to
> regap my valves tonight and want to try using my
> big ratchet to turn the engine. (That or jack
> up the rear end and put it in forth...)
>
> Thanks!
>
> Andrew Lundgren
>
>
>
|