It's normally on the RHS firewall, attached with a screw. In an MGB, at
least, the wire colours are green on the B terminal and a light-green/green
on the I terminal. It should also be marked TOP and be mounted
appropriately, and have a little threaded adjuster screw. In the same
vicinity may be the turn signal flasher, which is normally held in a spring
clip, and has green and light-green/brown wires on it.
The web site below may help with faulting, select 'Spanners', 'Electrics'
and 'Gauges'.
PaulH.
http://freespace.virgin.net/paul.hunt1/
(or if that URL doesn't work try )
(http://194.168.54.52/paul.hunt1 )
----- Original Message -----
From: Rick Sinclair <RHSinclair@USWest.net>
To: MG list <mgs@autox.team.net>
Sent: Thursday, December 30, 1999 11:57 PM
Subject: Instrument voltage stabilizer
> Can someone please tell me where the stabilizer is, and what it looks
> like? I've been having trouble with my dials, and a Moss tech tip said
> to check it. TIA
>
> Rory <:-P
>
|