Guys when you use easy outs, Buy left handed drill bits the correct size
for the easy out. Right handed bits tend to tighten the broken item more.
Just something I found that makes it a little easyer, Cost is a couple
bucks more, But More come out. Carl E.
Eric wrote:
> Scotsman wrote:
> >
> > I would use a small easy-out. Sometimes they are called screw
> > extractors.
> > It is a small spiral shaped affair that has the spirals cut in a
> > reverse thread. It has a shaft on the end like a tap does.
>
> ... beat me to it by a few minutes so I guess I will just second Bill's
> suggestion. It sounds like the ideal job for this tool and should
> simply "unscrew" without too much trouble (ha! famous last words).
>
> > Just used one at work today and it saved my arse!
> >
>
> No comment!
>
> Eric
> '68MGB MkII
|