Thanks! (though you probably shouldn't send attachments to the list itself)
Between this and a pair of jumper cables, I should be set :)
At 09:36 PM 11/2/99 -0500, James H. Nazarian wrote:
>Sending for the second time.
>
>"James H. Nazarian" wrote:
>
>> Just sent
>>
>> Jim
>>
>> Tab Julius wrote:
>>
>> > If you have a moment for a quick schematic, that would be very much
>> > appreciated indeed.
>> >
>> > At 12:07 PM 11/1/99 -0500, James H. Nazarian wrote:
>> > >Hello MG List,
>> > >
>> > >This "lights on" warning modification can be done "in about an hour"
using a
>> > >small dual relay or a pair of small single relays. You can buy either at
>> > Radio
>> > >Shack along with a 12 volt buzzer for a few bucks. If any one is
interested I
>> > >will sketch a simple schematic for it. You don't need an engineering
>> > credential
>> > >for this modification. A soldering iron, solder, wire cutter, wire
>> > stripper, a
>> > >few feet of wire, and electrical tape is about all you'll need.
>> > >
>
>Attachment Converted: "C:\INTERNET\EUDORA\DOWNLOAD\Buzzer.jpg"
>
|