On my 66 there is a ground strap between the left front motor mount
bracket (engine side) and the chassis.
Also, are you sure you have a good connection through your cable? Did you
scrape the paint down to bare metal where you bolted it to the chassis?
FlynShoot@aol.com had this to say:
>I installed a grounding cable between the chasis and the front of the plate
>where the tranny attaches to the engine.
>
>I still have a current running through my heater cable. It is through the
>strands that surround the main cable and is evidenced by sparking when the
>strands come into contact w/the heater valve.
>
>Any other ideas. I'm pulling my hair out. I have taped off the cable so that
>I can drive the car, but heat would be nice w/o having to lift the hood and
>manually moving the selector on the valve.
>
>Thanx.
>
>DC Smith
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the red one with the silver bootlid.
|