This is interesting. I installed 7 leaf springs in my CBB several months
ago. The car sat up high for a while and then settled down to a normal
stance after a couple of months. I JUST noticed today a very slight
squeaking sound (proportionate to the wheels turning, and then drowned out
with engine and wind noise as I accelerate) coming from the rear.
It sounds like the U-joint may be going bad and I've caught it early. I
haven't done a visual on it yet. Did replacing the springs and the
tube-shock conversion accelerate wear on the U-joint?
What are the chances it's the U-joint or should I look elsewhere first? I've
never heard of anyone replacing rear wheel bearings on a B! (come to think
of it, what ARE the turning surfaces on the rear wheels on my B???)
I recently replaced the U-joints on my Tahoe (which are much heavier), so I
know that the procedure is relatively simple and inexpensive. Should I just
replace the joints and be done with it or actually troubleshoot? ;)
Dan
>thing that I can't identifiy. When making a tight turn quickly, something
>rubs. At first I thought it was in the front, but recently while
testdriving
>the car with the battery cover off it was obvious that it's coming from the
>rear. It sounds like metal rubbing on metal, and the tires are not rubbing
>inside the fenders. I've posted about this before, and have checked a few
more
>items. The rear bearings feel tight, and exhibit very little endplay. The
>parking brake arm (what I thought it was)is assembled correctly and not
>rubbing.
>The lug nuts are on tightly. I am running the Rostyle rims with 195/60R14
>tires.
>I also have a set of the minilite look alikes with my autocross tires on
them.
>The autocross tires are the same size as the street tires. You would think
>that the problem would be exagerated by the stickier competiton tires, but
the
>opposite is true. The problem is worse on the street tires. I'm going crazy
>trying to figure this one out. Has anyone had a similar experience ?
>My car is lowered with lower springs in front and lowering blocks in the
rear.
>Also, I have 7 leaf GT springs and and Addco sway bar in the rear.
>
>
|