In a message dated 6/8/99 7:38:41 PM Central Daylight Time, mrazor@kih.net
writes:
<< Who can tell me how these things work. I have a bleeder valve
sheared off flush with the side of the caliper. There is a
hole in the middle that the #2 extractor fits in. There is a
picture of a drill on the box set of extractors.
1. Which way do I turn the drill (forward) (backward)
2. How much pressure
3. Am I suppose to chew the screw out or bite into it and back
it out
HELP!
MIKE R
>>
Mike:
In your case, take the thing off and take to machine shop.
Cheers..........
Ed
|