Ray,
That may be true for some engines
-----Original Message-----
From: REasterby@aol.com <REasterby@aol.com>
To: hoops@owt.com <hoops@owt.com>
Cc: mgs@autox.team.net <mgs@autox.team.net>
Date: Sunday, May 30, 1999 7:07 AM
Subject: Re: I screwed up my cam bearings
>The bearing surface normally is not machined, the line bore would be done
to
>the block and properly sized bearings inserted into the bores. Sounds like
>your bearing size was not matched to your cam bearing surfaces. Good Luck
>Ray Easterby
>72 BGT orig own
>88 XJ40
>89 Corolla GTS
>
|