mgs
[Top] [All Lists]

Re: Oil pouring out from oil filter head

To: bachldrs@swva.net
Subject: Re: Oil pouring out from oil filter head
From: REasterby@aol.com
Date: Mon, 17 May 1999 21:31:49 EDT
This adapter that allows the use of a spin on filter has a square shaped "O" 
ring seal to the block. If the attachment bolt has loosened, this seal may 
have been cracked or dislodged. Is your installation of the filter from the 
top or bottom?? I have had the seal stick from the spin on filter also. Also 
check your oil cooler lines, one should be attached to the filter adapter. 
Good Luck. 
Ray Easterby
72 BGT orig own
88 XJ40
89 Corolla GTS   

<Prev in Thread] Current Thread [Next in Thread>