David;
Forgot to bring the printout to work but checked last night and the
rocker adjustment nuts should be adjusted to 22lbs. There were several
other nuts listed also. Like you said how you achieve this, I dunno?
Anyone?
Andy 77B
----------
From: David Sylvain
To: Proudfoot, Andrew
Subject: RE: torque settings MG was WooHoo - sort of. <G>
Date: Wednesday, April 07, 1999 5:21PM
Thanks! There are some settings in Haynes, and in one of the other
books I
have around here. I suspect that there is no setting for the valve
adjustment nuts -- especially since there's no way to use a torque
wrench
and screw driver at the same time.
Is Spring finally arriving in Newfoundland? You guys must have snow on
the
ground in May!!
Dave S.
At 05:18 PM 4/7/99 -0400, you wrote:
>Dave;
>Quite sometime ago a list of torque settings for MGs was posted to the
>list. I printed it but it is at home so I shall look it up and let you
>know what I find tomorrow!!!
>Best Wishes & Safety Fast
>Andy Proudfoot 77B
>Gander, Nfld.
> ----------
>From: David Sylvain
>To: mgs@autox.team.net
>Subject: RE: WooHoo - sort of. <G>
>Date: Monday, April 05, 1999 12:02PM
>
>
>
>
>I adjusted the valves for the first time this weekend -- And now you
>guys
>are making me nervous! How tight is "tight" when pinching-up the nuts
>on
>the adjusters? Obviously, I don't want the nuts to back-off; but I
>don't
>want to strip 'em by overtightening.
>
>Dave Sylvain
>72B
>
>
|