Head Gasket Orientation

[Chris and Jodi Barnhart <barnhart@geneseo.net>]

Thanks to all for the advice.  Apparently there are some after-market
head gaskets that don't have a copper side and aren't marked for
top/front. Both sides of this gasket are silver in color.  Lawrie
pointed out that the perimeter of the gasket matches the block better
one way than the other (i.e. there is a "stepped" cutout in the back of
the block that matches one on the gasket).  Thanks, Lawrie!!!!! Hope
this helps someone in the same quandary.  

Chris
'69B  (with engine tomorrow)
Geneseo, IL