jmc wrote:
>
> This morning, while changing the oil, I forgot to fill the new (spin on)
> filter before I screwed it to the block. I didn't realize my error until
> after I filled the crankcase. So, as usual, I removed the plugs and spun
> the engine on the starter until there was oil pressure. I replaced the
> plugs, started the engine and took the car for a spin around the block.
> Afterward, when I pulled the dip stick to check the oil level, I saw all
> sorts of tiny bubbles (almost like a foam) in the oil on the stick. I
> guess that's what happened to the air that was trapped inside the filter.
> This isn't a problem, is it? I assume that over time all the air will
> find its way out. Am I correct? See I said it was a stupid question.
> Thanks in advance.
>
> Joseph
> 67 B Roadster
Joseph
I had never heard of filling a new filter before putting it on - running
your finger dipped in oil around the gasket yes - but actually filling
the filter? Does every one do this?
Rick
|