Jack the car up put it on stands put the jack under the lower arm unbolt
the sway bar link from the arm,Unbolt the bottom of the king pin,
Then lower the jack under the control arm slowly, Don't stand in front
of it , it could shot out , but if you let it down slowly it will fall
out,
Assemble in revwerse order. Carl E.
Rick Hopton wrote:
> Is there a way to remove the front coil springs from an MGB (1980)
> without the special tool.
> I need to replace the lower bushes.
>
> Rick Hopton
> 1980 MGB
> 1968 MG Midget
|