Larry Hoy wrote:
>
> Rick, thanks for the comments on the powder coat system.
>
> I know that colors are hard to explain on the internet but could you comment
>on
> the following. Using Moss' color as a base; is the Eastwood color more brown
>or
> more red? I wouldn't know if their color really fits either of these
>categories
> but I the more brown/more red issue is generally the typical color shift you
>see
> with maroon paint.
>
> Thanks for any help.
>
> Larry Hoy
> http://home.cwix.com/~larryhoy@cwix.com/
>
> > -----Original Message-----
> > From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> > Behalf Of Rick Brown
> > Sent: Thursday, February 04, 1999 5:05 PM
> > To: mgs@autox.team.net
> > Subject: Eastwood Powder Coat MG Maroon
> >
> > Just as we were closing up at Norristown last Sunday the R&D guy from
> > Eastwood showed up with a sample of the MG Maroon Powder Coat - he
> > sprayed an MG Valve cover - Looked real good - Not quite the same as
> > Moss' Maroon - probably not exactly the same colour as the original
> > but close enough. He also had a sample of the powder coat system
> > which I understands sells for about $150 - says they have already sold
> > over 6,000 units.
> >
> > I think it was one of the list members in OZ that wanted someone to
> > check out the colour match. Several of us looked at the sample and
> > as I say were impressed with the results.
> >
> > No interest - just passing on what I saw.
> >
> > Rick
> >
> <http://home.ptd.net/~mgrick/council.htm> Home page of the MG Council of
> North America
>
> <http://www.geocities.com/motorcity/9945>
Larry
It was almost the same as Moss' Maroon just a slight bit more brown in
it I think.
Rick
|