I've received my new fuel pipe and now need to bend it appropriately. Where
is the best place to purchase the tube bending tool? Is there any special
technique or advise for tube bending?
Banjo Bolts! When installing a new fuel pump the banjo bolt has a recessed
side and a flush side. What is the correct way to attach the fuel line to
the fuel pump with the combination of washers, banjo bolt, and flexible fuel
line?
Many thanks,
Kevin Rarick
> -----Original Message-----
> From: ccrobins [SMTP:ccrobins@ktc.com]
> Sent: Monday, January 18, 1999 9:55 AM
> To: Kevin Rarick
> Subject: Re: Threading 67 MGB fuel Main Feed
>
> Er, I forgot to mention I took off the right side wheel too, but I
> guess that's self evident. I didn't bend my new line correctl in the
> area near the shock. Going to have to change the bends a bit. If you
> order the new line from Moss, you get a coil of 3/8" ID tubing with
> those funny Brit fittings sweat-soldered on the ends. I had to buy a
> tubing bender tool. Another $30 down the black hole that is my B. ;^)
>
> Did you see my question about where the pipe may be clamped to the
> body?
>
> Yes I did see the other reply. The writer thought we talking about
> the line from the pump to the carbs apparently.
|