Barney Gaylord wrote:
>
> Well, I found out why my heater blower quit working. Dead spots. Three of
> the commutator segments are not connected with the rest of the armature
> circuit, so if I give it a spin it goes, but depending on where it stops it
> will start by itself.
There are shops that can rebuild any motor without
knowing or caring where they are from. They are really
all pretty simple when it comes down to it, with enough
wire sizes and jigs and brushes and such any is really
rebuildable.
--
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/
|