Don't start mine much in the cold, but for cars that have problems I
have found that a bit of ether works wonders!
On Wed, 30 Dec 1998 09:42:40 -0800, Len Drake wrote:
>Hi Dan - from the wilds of British Columbia, the procedure that was told
>to me many years ago and still seems to work is to pull out the choke to
>its fullest extent, engage the starter, and don't touch the gas. Give it
>a try.
>
>Cheers,
>
>Len Drake
>Kelowna, B.C.
>
>At 12:43 PM 12/30/98 -0600, you wrote:
>>The Loctite teflon thread sealant seems to have done the trick on the brake
>>line fittings!
>>
>>For the first time, the B failed to start. It's only 25 degrees outside, so
>>rather than burn the starter out, I decided to give her a break for now. The
>>car has been sitting in the driveway for a while except for a quick spin
>>around the block the other day -- started no problem in mid-40 degree
>>weather.
>>How do all you Northern folks do it? I suppose a garage would help, hmm?
>>What are the tricks for starting in cold weather? Or should I just be
>>patient and wait until it gets above freezing?
>>
>>Dan
>>73 B
>>
>>
>>
>
>
Andrew Lundgren
Lundgren@iname.com
http://www.itwest.net/~lundgren
|