todd
re: the hood seal plate--i need a better desc- i'm not sure if your referring
to the latch panel for the bonnett they are not available new at all- i have a
used set up for $250, i know its a lot but you have to Destroy a whole c to
get this part used.
re: filters you can use a b's filters but will require alot of effort and
squeezing(would not recommend it . .. i have orig for c filteres at $35 plus
shipping.
re: aftermarket filters - K & N set is available, but you need to remove the
air box and pollution cannister if you still have one.
re: heater valve...can't rebuild them ...new ones are being made in england as
we speak, and will be approx 97+pounds or $157 or there abouts. i heard that
one went for approx $250 USA during the summer. i have one NOS left but i
need it for me' if you are using during the winter just remove the old valve
and join the hose right to the head and wory about it again in the summertime
C's are more expensive to fix than a B' , but what would would expect for 62%
more horspower (145bhp -stock)
good luck and have fun , if i can help you can call as well
best regards
Tony Giordano
|