Lightly grease the splines. Any grease will do, but if you use silver
anti-sieze grease the small amount of grease that eventually seeps through
the hub on to the spoke nipples will be less noticeable. Do not pack any
grease in to the hubs (other than what you but on the bearings beneath the
grease cup.
Kevin Brown
Odessa, MO
Chris Chandler wrote:
> Well, it seems another message I sent from work never made it out to the
> light of day, so I'll try again.
>
> As some of you know, I'm fixing up my new B, and I'm about ready to
> start putting things back together again. The most burning question I
> have right now is: when putting wire wheels back on, should the splines
> be lightly greased? Should I use anti-seize on them? (Pardon if this
> is a silly question, but I've never had wires before).
>
> Secondly, do I need to have the hubs (front and rear) packed full of
> grease??? In FRONT of the grease cup???? I think I know the answer,
> but I want to be sure!
>
> Many Thanks,
> Chris
> '72 B Roadster
> '70 B Roadster
|