"Murch, Paul" wrote:
> The process involves applying the lead and then shaping
> it with a file. This produces large shavings and produces very minimal
> amounts of dust.
You have to sand it eventually. A file does not produce
a surface smooth enough to take paint.
Unless you are planning on using 1/8th inch of 2K
primer (ie: $400 worth) you are not going to make a
leaded area ready for topcoat without sanding.
--
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/
|