Thnaks for all the great ideas with the differential plugs. Last night I
found an old strut bolt from one of my fieros and ground it down on the
bench grinder. It worked quite well. As a side note, some of you are
saying that a 3/8" ratchet would work because it wouldn't allow one full
rotation. This was not the case on my '70 midget as that was the first
thing I tried. I also made sure, even with the new tool, that I could
remove the filler plug before I tried to remove the drain plug. I also
must say that the hand pump I used for refilling was a must on this car!
Thanks to everybody who responded with the good ideas. I really
appreciate it.
"If the truth hurts....... distort reality"
Scott Rodabaugh
Computer Operations Analyst
Wright State University
|