My 1980 B has a small clip holding in the switch, with some wire (a
twist-tie, maybe) wrapped from one one side of the clip to the other to
hold the clip tight. I don't know how much of it is original, but it seems
to work.
--Steve
At 09:37 PM 9/25/98 -0400, you wrote:
>The thermostatic switch in my '80 roadster radiator has a tendancy to
>push out of its grommet when radiator pressure builds up. I installed a
>new grommet when the radiator was re-cored. The small elbow for the
>overflow hose keeps the switch from slipping all the way out. Should I
>use some type of adhesive when installing the switch in the grommet to
>prevent this.
>Joe Tripp
>'80 LE
>
|