Nick Coleman wrote:
>
> Need to replace the ignition switch on my 73B. What is the best way to
> remove the bolts holding the switch on the steering column -- can you cut a
> notch in them and unscrew them ... or, do you need to drill them out.
>
> Thanks,
>
> Nick
> 73B
> NAMGBR
--
Nick-
I've done it both ways and either will work. The really hot set-up is
left hand drive drill bits. These are not as cheap as "regular" bits
but work very well. Usually as the point gets to open air, it grabs and
turns the stud right out.
Replacement break-off studs (for want of the real title) are available
at all the big name parts vendors.
Larry Dickstein
Kansas City, MO
Bob Allen's slow computer student!!!
|