Scarborough Faire sells the extra long covers that clip onto the same
lugs as the convertible top. Also, a new cover should be wide enough to
install snaps for the doors. I just installed a new cover from SF, and it
appears to me that there is enough material to do that. Call them up and
talk to them. They make them, so they should not be opposed to adding
some extra width, if it is necessary.
Randy Kegg
On Mon, 17 Aug 1998 10:00:01 -0600 (MDT) Kevin Sullivan
<kevins@khoral.com> writes:
>On Sun, 16 Aug 1998, Barney Gaylord wrote:
>
>> I recall the original question being about a tonneau cover that was
>long
>> enough the fasten to the same hooks and studs as the convertible top
>> mounting. This one would be about 11 inches longer yet than the
>"long"
>> tonneau cover, and uses a steel rail across the back similar to the
>> convertible top mounting.
>
>Yeah, I thought that was what you had. I know I've seen them
>somewhere.
>
>Kevin Sullivan kevins@khoral.com
>Khoral Research Inc. www.khoral.com/staff/kevins/mgstuff
>Albuquerque NM USA
>
>1960 MGA "Baby"
>1957 Magnette ZB "Pup"
>1959 Magnette ZB "P2"
>
>
|