The bushes at the front end are of SILENTBLOC manufacture, with an inner
and outer steel tube, and rubber interposed between. If you obtain a
tube, ( ie an old box spanner, or socket spanner,) just under the
outside
diameter, these old bushes can be drawn out. You will need a long
threaded bolt, and a larger tube for the bush to be drawn into. I
actually draw in the new one, using it to push out the old one, with a
suitable diameter washer bewteen to protect the bush center steel tube.
Those at the rear end are just normal 'top-hat' rubber bushes, as used
on the MGB, Wolseley 4/44. MGA, MG ZA,ZB, and millions of Morris
Oxfords.
If old, they often 'stick' to the shackle bolts.
NC.
|