This is a multi-part message in MIME format.
--part0_893949679_boundary
Content-ID: <0_893949679@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII
--part0_893949679_boundary
Content-ID: <0_893949679@inet_out.mail.aol.com.2>
Content-type: message/rfc822
Content-transfer-encoding: 7bit
Content-disposition: inline
From: MYLDN <MYLDN@aol.com>
Return-path: <MYLDN@aol.com>
To: mgs@autox.team.net
Cc: mga@ffwd.bc.ca
Subject: looking for parts!!!!
Date: Tue, 28 Apr 1998 21:36:50 EDT
Organization: AOL (http://www.aol.com)
Mime-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Hello all, Im looking for a front valance [steel] for an MGA some dents OK
but not twisted. also a question? how hard is it to replace the oil seal on
the front yoke of the rear end of an"A" looks like you should be able to just
unscrew the large nut holding the yoke on and pull out the old seal put in new
and screw the yoke back on. yes/no
Sean Muldoon. 58 roadster
--part0_893949679_boundary--
|