Your king pins are bad and need to be replaced. Because of sale
prices now is a good time to at least buy a major suspension kit. It can
be had for about $90 American and includes everything needed to do the
job. You will also need a reamer (a used one is about $70) or have the job
done for you for $80, this is the way that I would go. I did an article on
rebuilding the front suspension if interested.
...Art
On Wed, 29 Apr 1998, Trevor Boicey wrote:
> Another "found it on the inspection" problem, the lower
> connection of the swivel arms on my B are loose, so I am
> told. It appears to be where a bushing goes through the
> kingpin and through the A arms.
>
> Are there any non-replacement ways to solve this problem? Can
> it be bored over and a larger diameter bushing used?
>
> Thanks in advance. Any stray characters in this post were courtesy
> of my cat.
>
> --
> Trevor Boicey, Ottawa, Canada.
> tboicey@brit.ca, http://www.brit.ca/~tboicey/
> [ Seeking some miscellaneous MG parts, see the list on the web page... ]
>
|