You might want to try just opening the bleeder and wait for the
fluid to flow out on its own.If not then bleed it as you would normally
bleed your brakes. Open the bleeder while someone pumps the pedal. Be sure
to keep your eye on the fluid level.
...Art
On Thu, 23 Apr 1998, Joe R. Koster wrote:
> Hello everyone!
> I was wondering if anyone knows how to push the fluid from the slave
> cylinder
> to the master cylinder. I got my slave cylinder pressure hose and was
> wanting
> to find the best way to bleed the system. This is the part I dred. But I
> hope this is my problem why it wouldn't shift.
>
> Thanks in Advance!
>
> Joe Koster
> 71 MG Midget
> jkoster@ncpi.com
>
>
|