Re: How do you change the horn switch brush?

["James E Kearman" <jkearman@javanet.com>]

If the flexible wire inside the bushing is broken, you may be able to
replace it with a piece of Soder-Wick, which is a flat, braided copper wire
used to wick solder from connections on printed circuit boards. Radio Shack
sells it under another name. I fixed mine this way, still working after a
year, although I don't use the horn much.

Cheers,

Jim

-------

James E. Kearman
1973 MGB Roadster
jkearman@javanet.com