Midget Clutch Bleeding

[Kelvin Dodd <kdodd@West.net>]

Joe R. Koster wrote:

> replace both and that should cure my problem. If any one else has any
> suggestions on that I would appreciate that!

Joe:
        The 1275 Midget slave is notoriously difficult to bleed.  Try to 
hook up some kind of pressure bleeding system.  It can be bifficult to 
use pedal pressure to get all the air bubbles out of the slave.

good luck.  Your best bet is an air pressure hose conected to a modified 
cap.

Kelvin.