Ray,
According to the Owners Manual:
1 Release the hood latches on the header rail along with the snaps on
either side, at the windshield pillars.
2 Release the snaps and "press the dot" fasteners along both sides of the
body opening.
3. Grasp the hood material in the center just above the rear window
opening, and pull rearward, as the header rail is moved to the rear and
down.
You should now have the entire hood spread out over the trunk with the
rear window down..
4. Fold the side window sections over, and toward the center, making the
crease in the narrow section of hood material between the side window and
the back window. Dont fold the clear section!
5.Fold the hood forward, rolling it accross the top frame and downward
into the rear of the car.
Attach the hood cover and be on your way.
One point. I like to place a soft towel between over the top frame
before folding the hood over (step 5). This helps protect the side
windows from scratches.
Rick Morrison
72 MGBGT
74 Midget
On Mon, 16 Mar 1998 20:58:57 -0600 "Ray e. Huff" <mgbrh@earthlink.net>
writes:
>Can anybody tell us how to fold a convertable top properly? Or give us
>an address to someone who may know the proper way to do so? Working on
>a 75' midget with a fresh crown autotop.
>
|