mgs
[Top] [All Lists]

Re: MGA Regulator Cutout Sticking

To: kevins@khoral.com
Subject: Re: MGA Regulator Cutout Sticking
From: Mike Lambdin <MLAMBDIN@TOE.TOWSON.EDU>
Date: Mon, 26 Jan 1998 12:42:38 -0500 (EST)
Kevin,

Glass paper is an abrassive  material like garnet paper or sand paper. I
believe(?) it is termed "glass" because it is very fine and not extremely
abrasive. To demagnetize things get a demagnetizing coil (Radio Shack or
any electronics parts store will carry them). Just plug it into a 120 vac
outlet and slowly move it around the item you want demagnetized. 

Depending on the size and degree of magnetism the time required will vary
but it would take no longer than 1 or 2 minutes.


Mike Lambdin

<Prev in Thread] Current Thread [Next in Thread>