A metal etch should keep the car rust free for quite a while. Ask at an
auto paint store wht they carry.
...Art
On Sun, 18 Jan 1998, Richard L. Bergstrom wrote:
> Hello all!
>
> I am about to start the refinishing of my 74 Midget shell.
>
> It is basically rust free (surprise!) with some surface rust, but no
> perforations in floors, rockers, sills, or spring boxes. It is TOTALLY
> stripped of hardware...I mean there is nothing left to unbolt right now.
> I am very glad I have one in assembled condition as I didn't take this
> one apart...what a puzzle.
>
> What I need is suggestions for a good aerosol primer that I can put over
> prepped cleaned areas that will provide protection until I can put a top
> coat on and not react with that topcoat.
>
> I have heard a self etching primer called "Marhide" was used on some of
> the areas the PO had already wire brushed, prepped and primed. (I am
> going to redo that work since it is a relaltively small area)
>
> I'd like to do the final coat myself as well. I have a compressor,
> access to decent spray equipment and an HVLP system for the final
> work...but not for the months that I'll slowly be working on the car.
> That is why I need a recommendation for a high quality aerosol primer
> that will hold me over until I can do the final prime/sand/ repeat until
> smooth and then shoot color.
>
> Any recommendations on paint as well?
>
>
>
> Ric Bergstrom
> Richmond, VA
> 1973 Midget 1275 '88 240 Volvo '92 F150
> 1974 Midget 1275 (currently in many little boxes)
> Central Virginia MG Classics
>
|