Re: TD Oil Drain Plug

[Christopher Palmer <ctp@gbn.org>]

>Creative suggestion here:
>
>Start by drilling a hole through the plug to let the oil out.  If using
>an electric drill, be careful not to get oil into the drill motor.  Oil
>is generally non-conductive, so not much risk of a shock, but it could
>screw up the motor if enough oil got inside.
>
>After the oil is out you can go after the plug with heat.

Hey gang,
While he has a hole drilled, why not go at it with an ez-out or square
screw extractor (as big as possible)?
Just a thought...
ctp