Phil,
The 2 hp Sears compressor that John M is talking about sounds like the same
bullet proof one that I have also had, and beat to death, for ~20 years.
At that time, any compressor that was 2 hp or larger required 220 volts, I
don't know how they do it but now you can get a much larger compressor that
will operate on 120 volts. Keep in mind, when running the electric for the
compressor that the further you are from your power source, the greater the
voltage loss will be at the motor, and low operating voltage on motors is
not good, it will draw more amps than the rating tag. Make sure the wire
you use is large enough for the distance you have to run, longer length
requires larger wire for the amperage.
BTW if my memory has not failed, your air tools or blasting will use more
air than a spray gun, so don't be afraid of painting, maybe even a car.
Good luck and enjoy the air
Preserving the "B"reed
Jerry K
3 74-1/2 MGBs
1 75 Anniversary B
----------
> From: Phil Vanner <pvanner@pclink.com>
> To: spridget list <spridgets@autox.team.net>; mgs <mgs@autox.team.net>
> Subject: Compressors
> Date: Friday, December 26, 1997 2:31 PM
>
> I am considering buying a compressor for shop use. I don't see myself
using
> it for painting (certainly nothing as large as a car) but for driving
> tools, grinding and inflating and cleaning things.
>
> What do you all recomend for brands, minimum size/hp, and am I going to
> find this as useful as I think I am?
>
> Phil Vanner
> Maybe soon full of even more air.
>
|