In any electrical problem, except a fire, the first thing to
check is the grounds. You almost never have a problem, as described,
that is not a bad ground and/or corroded connector. I'd start w/ the
four way flasher and circuit. Oddly, a lot of stuff goes through that
circuit, including the turn signals.
Larry Dickstein
bugide@juno.com
There is no problem that cannot be solved
with either a checkbook or high explosives.
On Mon, 24 Nov 1997 21:39:47 -0500 "Tom Reichard" <Tom@LakeMurray.com>
writes:
>If the bulbs are good, the flasher is good, the switch is good and the
>wiring is good, then the turn signal ought to flash, right? Wrong. The
>singal lights, both front and rear, come on, but don't flash. (On the
>right
>side only. The left side flashes fine.) Since the lights are coming
>on, I
>know the bulbs, wiring, and turn signal switch is good. Since the
>other
>side flashes, I know the flasher is good. What am I missing???
>Thanks
>
|