Below... If you look under the valence you will see some nice holes spaced
for the threaded connectors on the oil coolder. The oil cooler gets
installed up against these holes from underneath and affixed with 4 screws
inserted from the bottom up. The hoses connect on the top side although you
will have to figure out which way works best for you. The hoses have one end
straight and one curved. The curved ends are supposed to go on the cooler
part but It seemed to fit much better with one straight on the cooler.
Good luck,
Chris Reichle
----------
From: mgs-owner
To: 'mgs@autox.team.net'
Subject: Oil Cooler location '80 MGB
Date: Thursday, October 16, 1997 9:05AM
Can anyone confirm the mounting location of the oil cooler on a 1980 =
MGB. Is it in front of or behind the rad or is it above or below the =
valance cover.
David Langton
Kelowna, BC Canada
'67 MGB Roadster
'72 MGB GT
|