mgs
[Top] [All Lists]

Re: MGA Technical Details & drawings

To: mike.cousins@wsnelson.com
Subject: Re: MGA Technical Details & drawings
From: FunE4MG@aol.com
Date: Fri, 12 Sep 1997 10:59:51 -0400 (EDT)
Mike,
I have 3 MGA reatsoration books and they all have photos but not drawings. I
understand that MGA Guru Todd Clarke has floorboard templates that he sells
so that the MGA restorer can become an amateur carpenter whilst replacing his
floorboards, he may have other drawings too!  As a matter of fact after
looking at his MGA Owners Information & Technical Guide, there are quite a
few drawings there, including seat frames, body panel cross sections, bumper
ends with the proper bolts,hex head fastener Identifications, floorboard
diagrams, and seat belt mounting proceedures. I believe there is a charge for
this manual.  Contact him at:

Todd Clarke Spares and Restorations  (CSR)
90 W. Swamp Road, Doylestown, PA 18901

Phone# 215-348-0595
FAX # 215-348-4160

Good Luck,
and you're welcome,
Tom Zylla
1960 MGA 1600 Roadster
San Diego, CA

<Prev in Thread] Current Thread [Next in Thread>