At 01:42 pm 8/9/97 EDT, ROBERT G. HOWARD wrote:
> Does anyone know how to calculate dwell settings for contact breaker
>gap, so we can set the gap more accurately than with feeler gauges?
> Thanks for the advice, in advance.
>Bob
>
For what it is worth the factory manual specifies the dwell at 51 degrees
plus or minus 5 degrees for the MGB. What's wrong with using that?
Graham
97 MGF
Graham McCann Rivett, ACT. Australia
gmccann@pcug.org.au
Phone/Fax: +61 2 62889055
______________________________________________________________
|