Hi Steve,
A number of things could cause the clunk. I'd start checking for slack
in the damper bushings, if you have the Andrex dampers, and the bolts in
the pan of the lower A arms, the fluid level in the dampers, wheel bolts,
all suspension bolts, the rubber bushings on the A arms. Jack up the
wheels and shake them to look for loose tie-rod ends, wheel bearings and
to check the kingpins-just in case.
Bob
On Thu, 28 Aug 1997 16:31:45 -0400 stevet@hbp.com (Steve Tritle) writes:
>What could cause an audible "clunk' when negotiating bumps? The
>kingpins
>were replace during the rebuild 4000 miles ago.
>
>steve
>52 TD
>
|