David:
The correct bolt is 3/8X31/4 BSF. I only have one instock, but you can call
Abingdon Spares Ltd. They list it under part no. 23/320. There about $1.90
each. You will need to also order the nut to go with it.
Cheers:
Skip.........At 07:56 PM 6/27/97 EDT, dmeadow@juno.com wrote:
>Can one of the suppliers or parts car owners on the list help with this
>one?
>
>I am missing the four bolts that hold the rear shocks (originally Girling
>that I am replacing with Armstrong) onto the rear frame of my TD. The
>DPO had replaced the originals with ones that are too thin. I'm
>concerned that the loose fit will cause the shocks to move around. The
>size seems to be unusual, I couldn't find any at the hardware store that
>were the right diameter (Whitworth threads are unnecessary, since a nut
>goes on the other end). Moss doesn't list them.
>
>Anybody got four or can tell me where to get them?
>
>Email me back directly, please, I am going to have to sign off the list
>for a few days next week.
>
>TIA
>
>David Littlefield
>Houston, TX
>
>
|