Matt Liggett wrote:
> The hose in my '70 Midget goes to an inlet on the valve cover. This
> is a nasty setup, IMO, as it draws gastank vapors through the
> crankcase. A better solution, IMO, would be to head straight for the
> carbs instead of taking this circuitous (and contaminatory) route!
The Midget 1500s do this, consider a modification. The valve
cover breather is connected to a T with the purge line and
the carb, flow is always "proper".
--
Trevor Boicey
Ottawa, Canada
tboicey@brit.ca
http://www.brit.ca/~tboicey/
|