Jay: Use the studs where the valve cover nuts attach. I slipped a hoist
chain link over the studs, put a large washer over that, and screwed the
valve cover nuts down on the washers.
Steve Byers
Havelock, NC
----------
> From: Jay Quinn <jpquinn@cyberramp.net>
> To: mgs@autox.team.net; healeys@autox.team.net;
british-cars@autox.team.net
> Subject: Best Engine hook points to yank engine
> Date: Sunday, May 18, 1997 11:20 AM
>
> I can't quit find any engine hooks to mount the
> chain to for lifting.
>
> I'm not using a strap. Just a chain.
>
> The car is a 62 Sprite and the engine/tranny is a
> 72 MGM.
>
> My thanks to all who resonded to my
> earlier email on the 2 mystry bolts.
>
> Q
>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Jay Quinn Systems Engineer
> jpquinn@cyberramp.net Pager: 972.319.7611
> http://www.cyberramp.net/~jpquinn/index.htm
> 1962 Austin-Healey MKII Sprite HAN6L2874
|