larry.g.unger@lmco.com wrote:
>
> Bud Krueger wrote:
>
> > I'm about to have a set of MGA 4.30 differential gears
> >installed in my '52TD so that I can cruise on the interstate
> >with you A/B/C folks. I need to obtain a Pinion Flange,
> >Moss #267-390. Unfortunately, Moss is out of stock. I
> >must plead ignorance of the MGA parts market. Can
> >anyone help me locate one?
>
> The pinion flange is common to both the 'A' & 'B' banjo
> axles ... so don't limit yourself to 'A' sources.
>
> TRF lists the pinion flange, ATB7059, but you will have
> to call them, 800-678-8764, to see if it is in stock.
>
> I'm sure that Randy Balogh (Strictly British) will have a
> used one ... contact him at 513-933-0950 ...
> MGBay@aol.com
>
> Safety Fast! ... larry.g.unger@lmco.com
> '61 MGA 1600 MkII
Hi Larry,
Thanks for the response. I don't have an MGB parts listing, so I
called Moss and asked if the comparable parts for MGA and MGB have the
same part number. They said no. I've been led to believe that it's only
the MGA ring and pinion that are (with machining/spacing) directly
interchangeable with the TD/TF. I had someone ask if wanted "the OE
pinion flange with 6 or 7 splines or the modified one with 10 splines".
I checked the pinion that I have and it has ten splines. My pinion shaft
has the part # ATB7158FHE MOWOG 10/43 stamped into it.
Pray tell, who/what is TRF? Is ATB7059 the part number that would
mate with my ATB7158 shaft? Thanks again.
Bud Krueger
'52TD - Lazarus
|