Aron,
I would use the self etching primer if I were you. The chemical etching
helps the paint adhere to the freshly sanded bright metal. Sanding to bare
metal and etching are two different things but work well together.
Good luck,
Rich
>Content-Transfer-Encoding: 7bit
>Sender: owner-mgs@autox.team.net
>Precedence: bulk
>Reply-To: Aron Travis <atravis@spacey.net>
>
>I recently aquired a '78 Midget that has been painted too many times.
>Since it needs a 'real' paint job, I'm going to have to sand to bare
>metal. Once I'm ready for priming, should I bother to use a self etching
>type of primer? It seems that the metal will already be etched from
>the sanding. Or should one always use etching primer with bare metal?
>-Aron Travis-
>"always in a automotive frenzy"
|