mgs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Starting an engine after a rebuild

from [Keith] [Permanent Link][Original]
To: "Phillips Kevin" <Kevin.Phillips@TIDV.dti.gov.uk>,
Subject: Re: Starting an engine after a rebuild
From: Keith <klh24@csufresno.edu>
Date: Thu, 6 Mar 97 11:13:50 -0800 
Kevin;

 I was told you should turn the engine over with the plugs out to make 
sure you have oil psi, allso put some oil in the oil cooler hose inlet at 
the block to  help it prime.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: NEW Improved Web Page - Check Out HIF-4's on the Midget!, David Hall
Next by Date:  Re: 6V to 12V battery conversion -Reply, John A. Wise
Previous by Thread:  Starting an engine after a rebuild, Phillips Kevin
Next by Thread:  Re: Starting an engine after a rebuild, Nolan Penney
Indexes:  [Date] [Thread] [Top] [All Lists]