mgs
[Top] [All Lists]

Re: MGB lighting system & alternator upgrade?

To: Naoki Takebayashi <ntakebay@bio.indiana.edu>
Subject: Re: MGB lighting system & alternator upgrade?
From: Wayne Kube <wkube@iadfw.net>
Date: Tue, 31 Dec 1996 20:45:41 -0600
Naoki Takebayashi wrote:
> So if I need a stronger alternator
> in the future upgrade, this is the time to replace it.
> I've never heard people talking about upgrading the alternator of MGB.  But
> Rally cars should need a better alternator. I appreciate your
> opinions and/or suggestions concerning lighting system upgrades.

Naoki -

        Here is a copy from the list a while back.  I saved it for future
reference.

Hope this helps!
        Good Luck


-- 
Wayne Kube      wkube@iadfw.net
1979 MGB        http://web2.airmail.net/wkube
Plano, TX       
NAMGBR UK Site  http://www.mgcars.org.uk/namgbr
NAMGBR Us Site  http://www.british-cars.org.uk/kimber/namgbr


Subject: 
        GTI alternator
  Date: 
        Fri, 21 Jun 96 09:32 EDT
  From: 
        gerry@hostel.lincroftnj.ncr.com
    To: 
        mgs@autox.team.net


Kurt asks :
>Gerry, a few weeks back you talked about using a GTI in place of the Lucas
>alternator in your MG. Could you give me some more specifics about the GTI
>alternator that you used? 

The Bosch alternator came out of a 1986 VW GTI with AC. All Golfs that
had AC had the 90Amp alternator, without AC you only got a 65A
alternator.

The fitment was really easy. 
1 - Remove existing alt.
2 - Get a piece  of 5/16" steel rod (about 7" long)
3 - Cut threads into the the first 1 1/2" of each end of the rod
4 - Place the Bosch alt. and thread the rod throughthe same mounting
holes
    as the original
5 - Use nuts and washers to securely locate the alternator.
    Make sure that the pulley of the alternator lines up straight with
the
    water pump pulley and the crankshaft. If you need to move the alt.
backwards
    or forwards, use more/less washers on the 5"16" rod
6 - I made up a new adjuster for the alt., but you can use the original
one.
7 - Now the fun part - go to your local PepBoys and locate the correct
fan
    belt !!. It took 3 trips to PepBoys to get the correct one so be
patient.


BTW- you may be tempted to use thread rod (from a hardware store)
instead
of the 5/16" steel rod - DON'T. The hardware store rods are really weak
and 
made of flimsy steel. I used a grade 5 long bolt and cut the head off.


gerry

<Prev in Thread] Current Thread [Next in Thread>