David Deutsch wrote:
>
> Concerning the brake light switch: wanted to test switch so decided to
> by pass. disconnected hot and switched wire connectors from switch
> leads and put aligator clips on the two switch leads and walked around
> back to check for lights. Only took a second to realize my stupidity
> and connect the wires together with alligator clips and discover that
> yes the switch is the problem. Safety Fast, David DeutschDavid,
I had to replace my switch last week on my TD.
It had corroded over the opening internally. Looked like water in the
fluid did it. I cleaned out the switch and inserted an awl and got
movement of the switch. It works now. Didn't even have to bleed the
system.
Good luck1
Steve
|