Michael Christie wrote:
>
> In message <3292353B.59E4@hbp.com>, Steve Tritle <stevet@hbp.com> writes
> >Michael,
> >
> >The TD is a 1952. The wiring is connected and I shorted the switch
> >circuit and got the tail light s to come on but not the stop lights.
> >
> >Steve Tritle
>
> Hi Steve,
> The wiring for the tail lights by-passes the switch, so shorting the
> switch shouldn't make the tail lights work. It sounds like the loom's
> wrong but can you let me know:-
>
> 1 Do you have the correct wiring loom for stop lights?
> 2 Have they ever worked before?
> 3 What wiring diagram are you using.
>
> If you don't have the correct diagram I can email or fax one to you.
> Is this a rewire or are you working with an old loom?
> Do you have access to a circut tester?
> --
> Michael Christie.
>
> "It is not necessary to know the answer, just to understand the question."
Michael,
My car was restored using the harness (loom) from Moss. The stop lights
have never worked. I do have a circuit tester but not a wiring diagram.
Could the switch be bad? I just don't wish to bleed the system to
install a new one.
Steve Tritle
|